• High Reliability

Engineering design based, each set has been strictly tested, waterproof grade up to IP67.

• Anti-Burst

The whole system is equipped with high and low voltage protection function as standard, the minimum protection voltage can be up to 80V, the maximum protection voltage can be up to 420V(charging voltage range 85-265V).

• CAN BUS Communication

CAN BUS communication function, you can switch the charging curve and view the machine parameters through the background, through the CAN BUS can be seamlessly connected with the control system to achieve data transmission and control.

• Customization Curve

The charging curve of batteries can be customized according to the customer's requirements, in order to achieve best matching requirements. 

• Digital Display

View charging status on the LED display ,and easily change charging curve with the push-button.

• Power Selection Function

AC input current can be controlled by power selection PIN.

Protection Function


1.Overheat Protection
 
When the internal temperature of the charger exceeds 80℃, the charging current will reduce automatically. When it exceeds 85℃, the charger shut down for protection. When the temperature drop, the charger antomatically resumes to charge.

2.Short Circuit Protection
   
When the output short circuit, the charger will automatically shut down the output. After troubleshooting, the battery can be reconnected to resume charging.
 

3.Battery Reverse Connection Protection

When the battery is reverse connected, the internal circuit of the charger will automatically disconnect from the battery, without charging, without damaging the charger.
 

4.Input low-voltage &Over-voltage Protection

If the input voltage is lower than 90V or higher than 264V, the charger will shut down protectively and automatically resume working with the voltage is normal again.
 

5.Full Automatic Shutdown

Automatically shut down after full charge.